HI-4004-45 Conditioning and Storage Solution for Calcium ISE, 500ml

Hanna Storage Solution will keep your electrode in tip top condition by not allowing the sensor tip and the reference junction to dry out. It will also minimise any bacterial growth while not in use – all vital for an optimum response time and result.

pH or Oxide Reduction Potential (ORP) electrodes should never be stored in distilled or deionised water as it will shorten the life of the sensor. Also, check our range of special storage solutions. For example: Sodium ISE Storage solution.

HI-4004-45 Calcium ISE Conditioning and Storage Solution (500ml)

The HI4004-45 solution is for the conditioning and storage for the HI-4004 and HI-4104 calcium liquid membrane Ion Selective Electrodes (ISEs). Measurement of calcium in solutions is determined by calcium ion exchange through the organic polymer membrane. The membrane of the half-cell or combination calcium ISE should be pre-soaked in HI-4004-45 solution for at least half-an-hour before calibration to optimise the sensor response.

Between measurements, storage solutions minimise microbial growth and prevent any effects of diffusion and Osmosis, as well as keeping the sensor tip and reference junction hydrated and clear – all important for an optimum response time and measurement.

Air-tight bottles with tamper-proof seals ensure quality and freshness of storage solution. Each bottle is marked with a batch number and expiry date.

Special range:

Sodium ISE Storage Solution – HI-401645L – for use with a FC300B Sodium Ion Selective Electrode (ISE)

Conditioning and Storage Solution for Calcium ISE – HI-400445L

No specifications available.